TV Mounter offers a specialist Sky Glass TV Wall Mounting Service for homeowners, tenants and businesses looking for a secure and neatly finished installation. We mount Sky Glass TVs in different room settings, including living rooms, bedrooms, apartments, media areas, offices and commercial spaces.
Before mounting, we assess the wall construction, work out a comfortable viewing height and check the surrounding space for sockets, furniture and other potential obstructions. Our installers work with brick, concrete, plasterboard, stud and dot-and-dab walls, selecting the fixing method according to the installation rather than treating every wall the same.
With 10+ years of TV mounting experience, TV Mounter is fully insured and provides Sky Glass installation throughout London, Kent, Essex, Surrey, Sussex, Hertfordshire, Cambridgeshire, Buckinghamshire, Berkshire and Bedfordshire.
We provide the best service with the facilities listed below. Feel free to contact us for further information.
Same day call out and installation
Provide free quote
Certified and skilled
Competitive and affordable price
Five stars rating
Sky Glass is considerably heavier than many standard slim televisions because the speakers and other components are built directly into the TV. This makes the screen size, weight and wall construction especially important when planning a Sky Glass wall mounting installation.
Both Sky Glass 1st Generation and Sky Glass 2nd Generation are available in three screen sizes:
| Screen Size | Sky Glass 1st Gen | Sky Glass 2nd Gen |
|---|---|---|
| 43″ | Approx. 14 kg | Approx. 12.7 kg |
| 55″ | Approx. 23 kg | Approx. 19.2 kg |
| 65″ | Approx. 28 kg | Approx. 26.5 kg |
These figures are approximately the TV weight without the tabletop stand.
The larger 55″ and 65″ Sky Glass models require particularly careful handling during lifting and positioning. The 65″ models can weigh more than 25 kg, so the wall construction and fixing method need to be properly assessed before installation.
TV Mounter installs both Sky Glass 1st and 2nd Generation TVs on suitable brick, concrete, plasterboard, stud and dot-and-dab walls. We take the individual TV size, weight and wall construction into consideration to provide a secure, level and professionally finished Sky Glass TV installation.
Sky Glass Air is the slimmer and lighter alternative within the Sky Glass range, making it well suited to wall mounting. Unlike the original Sky Glass and Sky Glass Gen 2, the Air has a simpler design and reduced weight, which gives it a noticeably different installation profile.
Sky Glass Air is available in three screen sizes:
| Screen Size | Approx. TV Weight |
|---|---|
| 43″ | 9.0 kg |
| 55″ | 13.4 kg |
| 65″ | 18.0 kg |
Because Sky Glass Air is lighter than the equivalent standard Sky Glass models, it can be easier to accommodate on a wider range of suitable walls. However, the wall construction and fixing points still need to be assessed correctly before mounting.
TV Mounter provides professional Sky Glass Air wall mounting for 43″, 55″ and 65″ models. We install on suitable brick, concrete, plasterboard, stud and dot-and-dab walls, carefully measuring the viewing height and positioning the television before drilling.
Whether you have the original Sky Glass, Sky Glass Gen 2 or the lighter Sky Glass Air, we can select an appropriate installation method for the particular TV and wall construction.
Flat TV wall brackets provide a sleek, low-profile finish, keeping your TV close to the wall. Ideal for modern living spaces, they offer secure, reliable support for all compatible TV brands and sizes.
A tilt TV wall brackets allow you to angle your screen downward to reduce glare and improve viewing comfort. Perfect for higher wall installations, they provide secure support and a clean, professional finish.
Our full motion TV wall brackets offer maximum flexibility, allowing you to extend, swivel, and tilt your TV for the perfect viewing angle. Ideal for corner installations, open-plan rooms, and reducing screen glare.
Mounting a Sky Glass TV on a plasterboard wall requires particular attention because Sky Glass models can be considerably heavier than many conventional televisions. The wall construction, fixing points and condition of the plasterboard should therefore be assessed before installation begins.
TV Mounter installs Sky Glass 1st Generation, Sky Glass Gen 2 and Sky Glass Air on suitable plasterboard and stud walls. We select the fixing method according to the wall construction and the size and weight of the particular Sky Glass model rather than relying on standard fixings for every installation.
For suitable plasterboard walls with an accessible cavity, we can also conceal compatible TV cables behind the wall for a cleaner appearance. This is subject to sufficient cavity space, clearance and the position of existing services.
With larger and heavier Sky Glass models, particularly 55″ and 65″ TVs, careful fixing, accurate levelling and safe handling are essential for a secure and professionally finished installation.
We mount Sky Glass on all types of wall
Plasterboard panels fixed over timber studs.
Solid masonry wall built from bricks.
Plasterboard bonded directly onto masonry walls.
Solid wall constructed from reinforced concrete.
Internal timber or metal framed plasterboard wall.
A clean cable setup can make a big difference to the finished appearance of a wall-mounted Sky Glass TV. TV Mounter offers in-wall cable management for Sky Glass installations where the wall construction allows cables to be safely routed through an existing cavity.
On suitable plasterboard walls, we can create an access point behind the Sky Glass TV and another at a lower level, allowing compatible low-voltage cables to pass through the wall cavity instead of hanging visibly below the television. The openings are then finished with suitable cable entry plates for a neat appearance.
In-wall cable concealment is subject to sufficient cavity space, a clear cable route and the location of existing services within the wall. We do not chase cables into brick or solid concrete walls.
This option works particularly well with Sky Glass 1st Generation, Sky Glass Gen 2 and Sky Glass Air installations where a simple, uncluttered wall-mounted finish is desired.
When cables cannot be concealed inside the wall, surface trunking provides a neat and practical alternative for a Sky Glass installation. It keeps visible cables organised and creates a much cleaner finish than leaving wires hanging underneath the television.
TV Mounter can install slim cable trunking from behind or underneath the Sky Glass TV down towards the power point or other connected equipment. The trunking is carefully positioned to keep the cable route as straight and discreet as possible.
Surface cable management is particularly useful on brick, concrete and other solid walls where we do not chase cables into the wall. It can also be used on plasterboard where internal cable concealment is not possible due to insufficient cavity space or obstructions.
Trunking can be used with Sky Glass 1st Generation, Sky Glass Gen 2 and Sky Glass Air, providing a tidy and professional-looking finish without cutting into a solid wall.
TV Mounter provides Sky Glass TV installation across a wide service area, helping customers who need specialist mounting for these heavier, all-in-one televisions. We cover London as well as Kent, Essex, Surrey, Sussex, Hertfordshire, Cambridgeshire, Buckinghamshire, Berkshire and Bedfordshire.
Our installers work with Sky Glass 1st Generation, Sky Glass Gen 2 and Sky Glass Air, including 43″, 55″ and 65″ models. We visit houses, flats, apartments, new-build developments, offices and commercial properties throughout our coverage areas.
Whether your Sky Glass needs mounting on plasterboard, a stud wall, brick, concrete or dot-and-dab, we assess the installation individually and use a fixing method appropriate for the wall and TV.
Same-day Sky Glass TV Wall Mounting Service may be available in many locations, subject to installer availability and the requirements of the job.
Yes. Sky Glass is designed to be suitable for wall mounting. Because it is heavier than many conventional televisions, the wall construction and fixing method should be carefully assessed before installation.
Yes. TV Mounter installs Sky Glass 1st Generation, Sky Glass Gen 2 and Sky Glass Air models in 43″, 55″ and 65″ screen sizes.
Yes, provided the plasterboard or stud-wall construction is suitable for the particular Sky Glass model. We assess the wall, TV size, weight and available fixing points before installation.
Potentially, depending on the wall construction, fireplace, available mounting area and viewing height. The installation area should be assessed before mounting.
The cost depends on the Sky Glass size, wall construction, mounting requirements and whether you require additional services such as cable management. Contact TV Mounter with your screen size, postcode and a photograph of the wall for an accurate quotation.
Same-day appointments may be available depending on your location, installer availability and the requirements of the installation.
Our Sky Glass TV Wall Mounting Service covers London, Kent, Essex, Surrey, Sussex, Hertfordshire, Cambridgeshire, Buckinghamshire, Berkshire and Bedfordshire.
TV Mounter has over 10 years of professional TV wall mounting experience and is fully insured. We work with different Sky Glass generations, screen sizes and common UK wall constructions, with each installation planned around the particular TV and property.
